Display Screen
APPLIANCE STATUS
THERMOSTAT
FLAME HEIGHT
TIMER DISPLAY/FUNCTION
Figure 7. RC300 Display Screen
Function Buttons
Use POWER button to turn the appliance on
and off.
Menu
Use MENU button to display the menu functions.
Menu
Only functions that can
V
Select
displayed. For example: Flame Height will not
V
Select
be displayed when the remote status is OFF.
Menu
Use the SELECT button to select the current
V
Select
feature.
Use the UP and DOWN arrows to toggle
through the menu functions and value selec-
V
V
tions in the submenus.
Hearth & Home Technologies • RC300-MON-VFL Multifunction Remote Control • 4018-900 Rev. B • 02/21
THERMOSTAT DESIRED
TEMP SETTING
CHILD LOCK
INDICATOR
TRANSMISSION
INDICATOR
LOW BATTERY
INDICATOR
ROOM TEMP
DISPLAY
be activated will be
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no but-
tons are pressed within 5 seconds. Press any button to
resume full functionality. In idle mode, only active func-
tions will show on the screen.
Standby mode
The remote control will go into a standby mode if no but-
tons are pressed within 5 minutes. Press the POWER
button to reactivate the remote control to ON mode. Ac-
tive functions will be displayed
5