Using Roll Paper; Loading Roll Paper - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Using Roll Paper

Loading roll paper

To load roll paper, follow the steps below.
Note:
O When REMAINING PAPER SETUP is ON, the
barcode (including the paper information) is
printed on the roll paper edge before the paper is
removed. This will facilitate paper setting the next
time the same paper is used.
See "PAPER SETUP" on page 25
O We recommend that you load the roll paper
immediately before printing. If the paper roll is left
in the printer, the roller for securing the paper may
leave a mark on the surface of the paper.
A
Turn on the printer by pressing the
Note:
After turning on the printer, press the
button before loading the paper to display the
instructions for paper settings.
B
Open the roll paper cover.
User's Guide
C
To unlock the adapter holder, push the lock
lever of the adapter holder down firmly. Then
move the adapter holder to the left with the
handle.
button.
D
Place the paper roll in the gap on the top face of
the printer.
Paper Handling 32