Paper Setup - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

PAPER SETUP

When you use non-Epson media, be sure to make the appropriate settings for the paper.
Item
ROLL PAPER REMAINING
PAPER TYPE
CUSTOM PAPER
User's Guide
Parameter
REMAINING PAPER SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
Photo Paper
Proofing Paper
Fine Art Paper
Matte Paper
Plain Paper
Others
CUSTOM PAPER
NO PAPER SELECTED
PAPER NO.1 - 10
Explanation
You can set the paper remaining counter function only if paper is
not loaded in the printer.
OFF:
O
The ROLL PAPER REMAINING function is disabled. The Roll
Paper Counter icon does not appear on the LCD panel.
ON:
O
The remaining amount of roll paper is displayed on the LCD
panel. When you press the
(including the paper type, the roll paper length, and the roll
length alert value information) is printed on the roll paper
edge. When the roll paper is changed, the barcode is
scanned and the paper type, the roll paper length, and the
roll length alert value information are set.
These settings are available only when REMAINING PAPER SETUP
is ON.
You can get a message when there is not much paper left, by
setting the roll alert.
When using roll paper, enter the length of the roll paper set in the
printer and the alert value. You can set the roll paper length from
5.0 to 99.5 m, and the roll length alert from 1 to 15 m.
You can select the media type loaded in the printer.
You can select a number (between 1 to 10) to register the settings
(such as Paper Type, Platen Gap, Thickness Pattern, Paper Feed
Adjust, Drying Time, Paper Suction) or to recall these settings you
have made.
The number you select here is displayed on the LCD panel.
See "CUSTOM PAPER" on page 26
button, the barcode
The Control Panel 25