Using Auto Take-Up Reel Unit; Pro 9900/9910 Only) - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
C
Remove the hook-and-loop fastener straps, and
refasten it downward. Then bring the front
paper basket up to the vertical position.
D
Tilt the paper guides.
User's Guide

Using Auto Take-up Reel Unit

(For Epson Stylus Pro 9900/9910
only)
When you want to print your data on roll paper and do
not want to cut it or feed it out onto the floor, you can
use the optional Auto Take-up Reel Unit to roll up
your print.
You can wind the roll paper forward or backward.
Forward
Warning:
w
Make sure the take-up reel unit is installed
properly and securely. Bodily injury may occur if
it falls.
Note:
O Make sure that the leading edge of the roll paper is
straight; otherwise, the Auto Take-up Reel Unit
does not take up the roll paper correctly.
See "Cutting the roll paper" on page 36
O See the Auto Take-up Reel Unit Setup Guide for
detailed information on installing the Auto
Take-up Reel Unit.
O When using Doubleweight Matte Paper or
Singleweight Matte Paper, wind the roll paper
forward.
O When using Singleweight Matte Paper with a
24-inch width or wider, use the Tensioner that
comes with the Auto Take-up Reel Unit to ensure
the print quality.
See "Winding paper forward" on page 48
Backward
Paper Handling 47