Voice Recognition Menu - Olympus DS-3000 Software Manual

Voice Recognition Menu

Start Voice Recognition
This command is available only when IBM's voice recognition applications ViaVoice98, ViaVoice
Millennium (not included), or later versions, are installed on the PC. When the command is
activated, SpeakPad starts automatically convert files selected in the Voice List window to
text files. This command is available only for DSS files recorded in standard mode and WMA files
(Hi-Quality mode), recorded with the DS-10 (or other supported recorders).
When multiple files are selected in the Voice List window, voice recognition is executed one at a
time. When voice recognition is completed for each file, the important information for the voice file is
inserted as a delimiter. The status of current voice recognition can be viewed using the [Show
Progress] command.
Range of Voice Recognition
This command is used to select the range of the file to be converted to text. Select [Entire File] or
[Between Index Marks]. A check mark appears by the selected choice.
If you select the entire file, the voice data from the beginning to the end of the file is converted to
text. If you select Between Index Marks, the voice data between the first and second index marks is
converted to text. If only one index mark exists, the data between this index mark to the end of the
file is converted to text. If there are no index marks, the entire file is converted to text.
Automatic Playback
If this item is checked, the screen switches to the Playback Control Window immediately after
starting the voice recognition operation. If you exit the Playback Control Window, playback
continues in the Dictation Window.
In this case, if the range to perform voice recognition is between index marks, playback starts from
the first index mark position.
Displays the Voice Progress
A dialog box appears and the voice recognition progress is shown for each file.
The file that is being transcribed by voice recognition is indicated as [Recognition Processing].
Those files that are standing by are indicated as [Waiting].
The current voice recognition transcription can be canceled by pressing the [End of voice
recognition] button.
You can remove the files that are waiting on the list with the [Cancel] button.
41