Compatibility - Siemens SIMATIC ET 200SP Manual

Compatibility

GSD file
The following table describes the use of the different GSD files with the interface modules
and the changes.
Configured/ IM 155-6 ST
plugged IM
V1.0.x
V1.0 Yes
V1.1 ---
V3.1 ---
Status of the supply voltage
Load voltage diagnostics are only valid if the station started up with a valid and complete
configuration.
● For modules in the following table without a parameter assignment, the status of the
supply voltage is always signaled as "1" regardless of the actual status of the supply
voltage.
● If a potential group is exclusively made up of modules without parameter assignment from
the table below, no group diagnostics "Missing supply voltage L+" is signaled for this
potential group.
Module
DI 8x24VDC ST
DI 16x24VDC ST
DI 8x24VDC HF
DQ 4x24VC/2A ST
DQ 8x24VDC/0,5A ST
DQ 16x24VDC/0,5A ST
DQ 8x24VDC/0,5A HF
38
Changes compared to the previous configuration
V1.1.x V3.1.x
Yes Yes
Yes Yes
•
•
--- Yes
•
•
The "Group diagnostics: Missing supply voltage L+" parameter can be
set on the server module
"Status of supply voltage L+ of the I/O modules" can be configured on
the server module
User data 512 bytes
Station extension via ET-Connection
Article number
6ES7132-6BF00-0BA0
6ES7131-6BH00-0BA0
6ES7132-6BF00-0CA0
6ES7132-6BD20-0BA0
6ES7132-6BF00-0BA0
6ES7132-6BH00-0BA0
6ES7131-6BF00-0CA0
IM 155-6 PN ST interface module (6ES7155-6AU00-0BN0)
6
Manual, 12/2014, A5E03576904-AC