Siemens SIMATIC ET 200SP Manual page 12

Product overview
2.2 Functions
Requirements
The table below shows the software requirements for a configuration with the
IM 155-6 PN ST interface module:
Table 2- 1 Version dependencies of other module functions
Function
Real-time communication
Isochronous real-time
communication
Prioritized startup
Device replacement without
programming device
Media redundancy (MRP)
Shared device
PROFIenergy
Module-internal Shared Input/
Shared Output (MSI/MSO)
Station extension via
ET-Connection
User data 512 bytes
Systems of third-party manufacturers: Depending on the range of functions of the third-party system
1
Cabling with fixed connection setting
If you set a fixed connection setting of the port in STEP 7, you should also disable
"Autonegotiation/Autocrossover".
You can find more information on this topic in the STEP 7 online help and
● As of STEP 7 V12, in the PROFINET with STEP 7 V13
(http://support.automation.siemens.com/WW/view/en/49948856) function manual
● As of STEP 7 V5.5, in the system manual PROFINET System Description
(http://support.automation.siemens.com/WW/view/en/19292127)
12
Product version Firmware
of the module version of the
as of module as of
1 V1.0.0
1 V1.0.0
1 V1.0.0
1 V1.0.0
1 V1.0.0
1 V1.0.0
1 V1.0.0
1 V3.1.0
5 V3.1.0
1 V3.1.0
Configuration software
Configuration with STEP 7 as of
GSD file V5.5 SP3 with
(http://support.auto HSP241
mation.siemens.co
m/WW/view/en/196
98639/130000)/soft
ware from a third-
party manufacturer
1
X
---
X
X
X
X
X
X
X
IM 155-6 PN ST interface module (6ES7155-6AU00-0BN0)
Manual, 12/2014, A5E03576904-AC
STEP 7
(TIA Portal), as
of V11 SP2
X X
--- ---
X X
X X
X X
X X
(as of V13 SP1)
X X
X X
(as of V13 SP1)
X X
(as of V13 SP1)
X X
(as of V13 SP1)