Cleaning The Interior; Cleaning The Feed Rollers - Oki B730dn User Manual

Oki b730dn: user guide
Hide thumbs Also See for B730dn:
Table of Contents

Advertisement

C
I
LEANING THE
NTERIOR
After clearing paper jams or replacing the drum/toner cartridge, inspect the inside of the
printer before closing cover A.
>
Never touch a labelled area found on or near the heat roller.
You can get burned.
>
If a sheet of paper is wrapped around the heat roller, do not try
to remove it by yourself to avoid injuries or burns. Switch off
the machine immediately, and contact service.
>
Remove any remaining pieces of paper.
>
Remove any dust or stains with a clean dry cloth.
C
LEANING THE FEED ROLLERS
When feeding cannot be done, follow the procedure below to wipe the feed roll gently with
a well-wrung soft cloth.
There are feed rollers in the interior of this printer (two locations, total of four), tray module
(one location) and paper tray (one location). Follow the cleaning procedure
clean the feed rollers at each location.
WARNING!
Daily Care > 43
(page
45) to

Advertisement

Table of Contents
loading

This manual is also suitable for:

B700 seriesB710B720B730

Table of Contents