Table of Contents
Advertisement
3.
4.
2.2.3
Mounting the Device to a Panel
To mount the device to a panel, do the following:
1.
RUGGEDCOM RS8000H
Installation Manual, 11/2022, C79000-G8976-1022-07
1 1
Rack Mount Adapter
1
Screw
2
Figure 2.3
Rack Mounting
Insert the rack mount adapter and device assembly into the rack.
Note
Since heat within the device is channelled to the enclosure, it is recommended
that 1 rack-unit of space, or 44 mm (1.75 in), be kept empty above the device.
This allows a small amount of convectional airflow.
Forced airflow is not required. However, any increase in airflow will result in a
reduction of ambient temperature and improve the long-term reliability of all
equipment mounted in the rack space.
Secure the adapter to the rack using the supplied hardware.
Place the device against the panel and align the adapters with the mounting
holes.
Installing the Device
2.2.3 Mounting the Device to a Panel
2
11
Advertisement
Table of Contents
