Self-Test Results - NorthStar 2505 Installation Manual

Self-test results message
HEADER
$PMCAG,902,xxxxxx,xxx,a,aaaa,xx,xx*hh<CR><LF>
1. Sensor self-test result from the last initiated test (PASS, FAIL)
2505 INSTALLATION MANUAL, Revision A
Result of the GPS sensor self-test. This message is automatically
output in response to an initiated self-test request (see input
message identifier 003). This message can also be requested
through input message identifier 004 to retrieve the current
status of the sensor without initiating a self-test sequence.
CONTENTS OF DATA FIELDS
Examples:
$PMCAG,902,613913,042,A,PASS,00,63*23<CR><LF>
$PMCAG,902,613913,042,A,FAIL,03,49*3B<CR><LF>
Appendix C NMEA output protocol
faults identifier
number of active faults
1
sensor self-test result
software revision letter
software variation number
software part number (root number)
Page 37