Table of Contents
Advertisement
Recorder Hardware Installation
Voice card installation and wiring
Different cabling and wiring setups are required for voice cards compatible
with the TDM Recorder. The following sections show compatible Ai-Logix
voice cards, their installation, and typical wiring requirements for digital
trunk-side (DP models), digital station-side (NGX models), and analog
station-side (LD models).
Before setting up the wiring, a site survey must be conducted to clarify cable
requirements and equipment location. Additionally, computers must be
checked to ensure that they can accommodate full length PCI cards.
Note: A Customer Supplied Unit (CSU/DSU) may be required between the
PBX and the card.
Installing the voice card
1 Ensure that the voice card is a compatible Ai-Logix model according to
the following
Ai-Logix Voice cards compatible with the TDM Recorder
Type
Analog
Station
Side
Digital
Station
Side
20
Ai-Logix
Description
Model
LD2409
Newer versions of Ai-Logix's analog station-side
recording voice cards capable of recording 4, 8, 16
and 24 ports respectively.
NGX1600 Voice card that records 16x2-wire digital stations
(8x4-wire). It is triggered by D-channel events. Can
have up to one MX80 daugtherboards attached
NGX2400 Voice card that records 24x2-wire digital stations
(12x4-wire) triggered by D-channel events.
Standard 3.0
Nortel TDM Recorder
Advertisement
Table of Contents
