Media Card
Figure 5: Static discharge points
Wrist strap
connection point
Wrist strap
connection point
Complete the following tasks during repair and maintenance procedures:
Turn off the circuit breaker or switch for a module power supply before the
!
power supply is removed or inserted.
Software disable cards, if applicable, before they are removed or inserted.
!
Whenever there is an enable/disable switch, hardware disable cards before
!
they are removed or inserted.
Return defective or heavily contaminated cards to a repair center. Do not
!
try to repair or clean them.
40
Power supply slot
Module
rear
Bare metal strip
Module
front
Standard 2.0
Bare metal strip
Symposium Express Call Center
553-5000