Nortel Quality Monitoring User Manual page 39

September 2007
-------------------------------------------------------------------------------------
# Section :
# :
# Keys :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
# :
Server Infrastructure Guide
Notification
UserPriority
User User Id of the user who will receive notifications
BroadcastPriority Causes notifications with priorities equal or
EmailPriority
EmailTo
EmailFrom
PagerPriority
values of the setting. The server must be configured
PagerEmail
WitnessTo=
Causes notifications with priorities equal or
greater than (n) to be sent as messages to the
user, defined by the User setting. To receive
the notification, the user must be logged on
at the time.The parameter may have the
following values:
0 – Sending user messages is disabled.
1 – All the notifications will be sent to user.
2 – Notifications with medium, high, and
critical priorities will be sent to user.
3 – Notifications with high and critical
priorities will be sent to user.
4 – Notifications with critical priorities will
be sent to user.
The default is 0.
greater than (n) to be sent as broadcast messages
to all the users logged on. See the description of
the UserPriority for the possible values of the
setting.
The default is 0.
Causes notifications with priorities equal or
greater than (n) to be e-mailed to the address
specified by the EmailTo settings.See the
description of the UserPriority for the possible
values of the setting.
The server must be configured to support email.
The default is 0.
A list (up to 400 characters long) of e-mail
addresses separated by appropriate mail system
delimiter.
Example: EmailTo=jdoe@zzz.com
An e-mail address (up to 40 characters) used as a
sender address in the email.
Causes notifications with priorities equal or
greater than (n) to be emailed to the pager email
address specified the PagerEmail settings. See the
description of the UserPriority for the possible
to support email.
The default is 0.
A list (up to 400 long) of email addresses
separated by
appropriate mail system delimiter.
Example: PagerEmail=5551234@skytel.com
An email address (up to 40 characters) of support.
Server software architecture
39