Assigning A Telephone To A Norstar Tsp Client - Nortel TAPI User Manual

Assigning a telephone to a Norstar TSP client

For each Norstar TSP client, you must assign an extension number to their network
user ID. The Norstar TSP server uses this information to make sure the correct
telephone is controlled by a Norstar TSP client.
You assign the extension numbers to the network user IDs using the TCMAPP
utility. This utility is made by Microsoft Corporation. For additional information
about using the TCMAPP utility, refer to the documentation that came with
Windows NT Server.
Tip: Although a Norstar TSP client can log in on any PC on the network, the
extension number associated with that client does not change unless you
change it in the TCMAPP utility. This allows a Norstar TSP client to
receive TAPI messages for their telephone from any PC they log on to.
This also means that the TAPI messages a Norstar TSP client receives are
always for the telephone assigned to them, not necessarily the telephone
beside the PC they are using.
To assign a telephone to a Norstar TSP client:
1. On the Norstar TSP Server, click the Start button and then click Run.
2. Enter TCMAPP.
The TAPI Administration Application window appears.
Note: In the example above:
SALTLAKE is the domain,
butte is a user domain account,
missoula is a user domain account.
P0605043 Issue 01
Configuring Norstar TSP on the Windows NT 4.0 Server 19
Norstar TSP Server Configuration Guide