Table of Contents
Advertisement
ISG 2000 User's Guide
Removing Interface Modules
To remove an interface module from a bay:
WARNING:
When inserting or removing interface modules, be sure that the power
is off. Interface modules are not hot swappable.
1. Loosen the thumbscrews on each side of the interface module by turning them
counterclockwise.
2. With your thumbs, pull the blue locking levers out.
Figure 17: Releasing an Interface Module
Swivel levers
outward.
3. Grip the levers, then gently slide the card straight out.
Figure 18: Removing an Interface Module
Grip levers and
slide out module.
34
Replacing Interface Modules
Advertisement
Table of Contents
