Callpilot Unified Messaging; Installing The Desktop Messaging Client - Nortel CallPilot Mini Release Note

5 CallPilot Unified Messaging

5.1 Installing the Desktop Messaging Client

To use Desktop Messaging keycodes must be installed and entered. Presently, there are two
streams of the Desktop Messaging client software; the correct one to choose depends upon the
language being installed. Please see section
versions and supported languages.
To install the desktop client, the Desktop Client.zip file needs to be downloaded to a local
directory.
After the download, extract this file to a temporary local location.
Run setup.exe to start the installation process.
Respond to the dialogue box questions.
Enter your mailbox #. This mailbox # will also be the extension being called if you are
using the telset player.
Enter the server name.
Enter the SMTP/VPIM prefix if it exists on your current system.
The search base should ALWAYS be: ou=users,ou=callpilot
Voicemail by default uses only one VOICE channel for outgoing calls. If you wish to use more
than one telset Player session at a time, you must increase the number of outcalling channels.
This can be done under Configuration->System Properties->Max outcalling channels. Increase it
to approximately 50% of the TOTAL number of voice channels you have. (If the system is 8
ports, set this to 4.)
Refer to the Nortel Networks documentation.
For English, CallPilot Mini Installation and Maintenance Guide
For French (Euro), CallPilot Mini Installation and Maintenance Guide
All CallPilot Mini documentation is located on the software and documentation CD shipped with
the CallPilot Mini package or on the Nortel Technical Support Portal at
www.nortelnetworks.com/support.
Issue 1.3
5.2 for the latest Desktop Messaging client software
CallPilot Mini v1.6a Service Update
Release Notes
12
Page 12 of 15