Nortel 1000 Installation And Configuration Manual page 221

Windows 2000 server reference
8
9
10 When the Network Settings dialog box appears, accept the default value, Typical
11 The Workgroup or Computer Domain dialog box appears. Make the appropriate
12 Wait while the set up program installs components. This takes several minutes.
13 Wait while the set up program performs final tasks. This takes several minutes.
14 The Completing the Windows Setup Wizard dialog box appears. Click Finish to
Allowing TM 3.0 client access without constant server log in
(optional)
Procedure 52
Allowing TM 3.0 client access without constant server log in (optional)
TM windows and Web clients require an administrator account to be logged into the
server at all times, since it uses the identity of the logged-in user for access.
To allow TM 3.0 client access without logging into the server at all times, the following
configuration change for Windows server is required:
1
2
3
4
5
6
7
The Date and Time Settings dialog box appears. Adjust the Date, Time, and Time
Zone, as appropriate, and then click Next.
Wait for the Network Settings dialog box to appear. This takes several minutes.
Settings, and then click Next.
selection, and then click Next.
reboot the system.
Log on to the Windows server.
Select Start > Programs > Administrative Tools > Component Services.
From the Component Services window, expand Computers > My Computer >
COM+ Applications.
Select TM 3.0 Application, and open the Properties window.
Select the Identity tab and click on the This User radio button.
Enter the local administrator account and password.
Click OK.
Note: This procedure works for all applications except DECT.
CS 1000 Telephony Manager Installation and Configuration
End of Procedure
End of Procedure
221