Access Permissions - Nortel 1000 Installation And Configuration Manual

Adding TM 3.0 Web users
TM 3.0 Web page. For information about setting user access, refer to
page
Precaution
As a security precaution, with any upgrade or reinstallation of TM 3.0 software, access
profiles for all user groups except Administrator are reset. Any member of the
Administrator user group can log in and set up access profiles for members of the
HelpDesk, end-user, and default plug-ins.
Plug-ins
When an administrator or HelpDesk user first points a browser to the TM 3.0 Navigator
Website, a check is performed to see if the user has the required TM 3.0 Java plug-in. If
the plug-in is not installed, the administrator or Help desk user is given the option of
downloading and installing the plug-in. This operation is similar to the standard
download operations in that the user must download the plug-in to the user's hard disk,
and then it installs itself onto the computer.
The plug-in check is performed the first time the application is launched.
Default URL
The default TM 3.0 URL is the end user login page. To navigate to the administrator
login page, place /admin after the TM 3.0 IP address or host name.

Access permissions

When TM 3.0 starts for the first time, the Administrator profile is the only active profile.
Access permissions for the other Windows XP or Windows 2000 Groups that have been
set up on the TM 3.0 server must be assigned.
Administrator Group access permissions
Persons belonging to the Administrators user group on the TM 3.0 server can log in to
the TM 3.0 Website and get unrestricted access. The Administrators group has
unrestricted access by default. Access permissions for the Administrators user group can
not be altered.
116.
Example: http://TM3.0 IP address or host name/admin
CS 1000 Telephony Manager Installation and Configuration
113
"User groups" on