Using The Cli For Ssh Server; Defining An Ssh Server (Cli); Enabling Or Restarting The Ssh Server - Nortel Contivity 1100 Configuration Manual

Using the CLI for SSH server

Defining an SSH server (CLI)

To configure an SSH server on the Nortel VPN Router, from CLI Global
Configuration Mode, enter:
ssh-server {port <portnum> | private | public }
or
no ssh-server { private | public }
where:
• portnum—specifies the SSH server port
• private—enables private interface filters on the specified SSH server port
• public—enables public interface filters on the specified SSH server port
For example, enter:
CES(config)# ssh-server port 432

Enabling or restarting the SSH server

To enable or restart the SSH server, from CLI Global Configuration Mode, enter:
service ssh {enable | restart}
where:
• enable—enables the ssh server
• restart—restarts the ssh server
For example, to enable the SSH server, enter:
CES(config)# service ssh enable
For example, to restart the SSH server, enter:
CES(config)# service ssh restart
Chapter 5 Configuring the system 115
Nortel VPN Router Configuration — Basic Features