Using The Cli For Ssh Server; Defining An Ssh Server (Cli); Enabling Or Restarting The Ssh Server - Nortel 7 Configuration

Using the CLI for SSH server

Defining an SSH server (CLI)

To configure an SSH server on the Nortel VPN Router, from CLI Global
Configuration Mode, enter:
ssh-server {port <portnum> | private | public }
or
no ssh-server { private | public }
where:
• portnum—specifies the SSH server port
• private—enables private interface filters on the specified SSH server port
• public—enables public interface filters on the specified SSH server port
For example, enter:
CES(config)# ssh-server port 432

Enabling or restarting the SSH server

To enable or restart the SSH server, from CLI Global Configuration Mode, enter:
service ssh {enable | restart}
where:
• enable—enables the ssh server
• restart—restarts the ssh server
For example, to enable the SSH server, enter:
CES(config)# service ssh enable
For example, to restart the SSH server, enter:
CES(config)# service ssh restart
Chapter 5 Configuring the system 115
Nortel VPN Router Configuration — Basic Features