Nortel Contivity 1100 Configuration Manual page 110

110 Chapter 5 Configuring the system
5
6
7
8
NN46110-500
— 2400
— 1200
— 600
— 300
— 150
d Data, Parity, and Stop applies only when AoT is selected.
e
Enter the Modem Initialization string. Refer to the manufacturer's
documentation to learn the vendor-specific character initialization string.
If you pre-configure the modem and use the Nortel VPN Router default
initialization string (ATZ) it will provide the best results.
f
When you select the baud rate, you must click the Reset button to change
the port to the new baud rate.
Select Log File Life Time or Log File Disk Limit. The default log file life
time is 60 days and the default log disk limit is 100 megabytes. Select a value
for the log file life time from the list.
Check Write System Log To File to enable saving log data to a file.
Select FTP server passive mode. If you do not select this check box, you can
still use passive FTP connections to connect to the unit, but you cannot
perform directory listings or upload and download files.
The data collection interval specifies how the long the system should wait
before collecting new system data for logging. Enter the time in minutes.