Branch Office Quick Start Template; Connecting For Internet Access; Before You Begin; Check That You Received The Following Items - Nortel Contivity 1100 Configuration Manual

Chapter 3 Setting up the Nortel VPN Router 1010, 1050, and 1100 67

Branch office quick start template

The branch office quick start template provides a list of values that the local
Nortel VPN Router 1010, 1050 or 1100 users will need to enter on the BOQS
window. See
template. You can enter the appropriate values in the right-hand column and then
fax, send, or email the template to the local user along with any other information
that they may need, such as who to contact for further information or questions.

Connecting for Internet access

This section provides information on how to set up the Nortel VPN Router 1010,
1050, and 1100 series of switches for basic Internet access through a cable or DSL
modem. This set of instructions in also provided on the readme that is shipped
with the hardware.

Before you begin

Before you connect the Nortel VPN Router 1010, 1050, or 1100, you must have
the following:
• Internet connection—If your DSL or cable modem is not yet installed, contact
your Internet service provider (ISP). The ISP may need the LAN 1 MAC
address on the back of the VPN Router.
• Provisioning worksheet—The company or service provider that supplied the
VPN Router sends this worksheet separately via e-mail or fax. The worksheet
provides information that you will type into a quick-start tool to complete the
configuration of your VPN Router
Note: If you did not receive the worksheet, call the ISP or the company
that supplied the Nortel VPN Router 1010, 1050, or 1100. Do not
connect the VPN Router until you have the worksheet.

Check that you received the following items

Make sure that you received the following items with your Nortel VPN Router
1010, 1050, or 1100:
Appendix A, "Branch office quick start
Nortel VPN Router Configuration — Basic Features
template," for a copy of the