Reviewing Your Work; Checking System Capacity; Reviewing With The Customer - Nortel Meridian Companion Reference Manual

Reviewing your work

Review your work to insure that the sales group can use it, and that it is
complete, legible and acceptable for the installer, maintenance personnel and
your customer.
Before finishing your work, you must know:
•
•
•
•

Checking system capacity

does not exceed the capacity of the system to be installed.
multiple systems. If so, see "Planning multiple systems" on page 67.)
200 m) (wiring length for 24 AWG) from all cell centers. If it is more, look for
other locations for the Controller.

Reviewing with the customer

When you finish, show the customer:
•
•
•
•
Note: If you recommend external antennas for outdoor coverage, inform the
the location of the cell centers
how many Base Stations you need to install at each cell center
where and how many external antennas to install
if there were any areas you could not cover
The number of Base Stations, portables and access lines for the system
The appropriate number of cells. (You may need to replan the site with
The recommended location of the Controller is not more than 4,000 ft (1
the final positions of the Base Stations
any locations where there are too many portables
installation (and location) of any recommended outdoor external
antennas
any areas where you could not meet the coverage requirements
customer that the coverage is an estimate.
Meridian Companion Site Planning Reference Manual
Site planning basics Page 41 of 102