Nortel Meridian Companion Reference Manual page 41

Figure 16 : Multi-cell distance
c e l l c e n t e r
f l o o r m a r k e r
X
c r i t i c a l p o i n t
1. Choose a location for the cell center on the floor plan that
— is the farthest from one of the critical points and is still within range
— lies on the dividing line between the two edges of the coverage area
— complies with the Base Station installation guidelines
— is within the coverage area
2. Mark each cell center on the floor plan
1C2.
3. Follow the steps of "Locating cell boundaries" on page 30 for each cell
center.
4. Define and mark on the floor plan any subsequent critical points where
each cell boundary crosses the edge of the coverage area.
Note: Use the subsequent critical points to fill in the coverage area
between the first two cells using the "Single-cell technique" on
page 32. An example of using the single-cell technique to plan
a multi-cell distance is shown in Figure 17.
Site planning basics Page 35 of 102
Meridian Companion Site Planning Reference Manual
and label them 1C1 and