Nortel Nautica 4000 Release Note page 30

NauticaRS 4.132R Release Notes for the Nautica 4000
Figure 2-9.
box# system
system# blacklist-timeout 20
[Save] system# save
system#
2-12
a. Click on the unit to be configured in the Nautica Wizard
window.
b. Choose Advanced > System.
c. Change the Blacklist Timeout parameter to 20 seconds.
Edit System Settings Window
If you are using BCC, enter the following at a configuration
prompt:
7. Frame Relay is not configurable from Nautica Wizard. To
configure frame relay you must use BCC. When you are in
BCC it is best to use the automatic Permanent Virtual Circuit
(PVC) feature.
300221-C Rev.00