Nortel Nautica 4000 Release Note page 24

NauticaRS 4.132R Release Notes for the Nautica 4000
2-6
Figure 2-5.
e. Name this profile Modem for ease of reference and
change the CHAP Timeout(s) parameter to 0.
f. Click on OK to save the profile, and OK again to close
the PPP Profile Table.
It is now necessary to add this profile to all the BRI and PRI
devices attached to your router.
g. In the Nautica Wizard window
router that is to connect to the remote PC.
Add PPP Profiles Configuration Window
(Figure 2-3), click on the
300221-C Rev.00