PPP Profiles
IP Parameters
IP RIP Parameters
119136-D Rev. 00
To allow per-user configuration, some PPP parameters have been
moved from the PPP profile to the path, keeping the same
parameter names:
challenge-timeout
encap-enable
bacp-enable
Some parameters have moved from the SYSTEM context to the
IP context:
state enabled
routing enabled
en-filter no-filtering
cache-timeout 998
[ previously these were in co sys:
ip-routing yes
ip-filter NoFiltering
ip-cache-timeout 998 ]
IP RIP has been enhanced to support both Split Horizon and
Poison Reverse. There is a new path parameter "rip-type" in
addition to the existing RIP parameters:
ip-rip-direction [ sendandlisten | sendonly | listenonly | none ]
rip-support [ rip1compat | rip1subnet | rip1 | rip2 ]
Guidance Notes
2-9