Nauticars 5.016R New Features - Bay Networks Nautica 200 Release Note

NauticaRS 5.016R Release Notes for Nautica 200

NauticaRS 5.016R New Features

1-2
The following is a list of the new features available in
NauticaRS 5.016R. Further information about most of these
features is presented in Chapter 2.
• Nautica Wizard has many major new features and
improvements
• Nautica Watch has been significantly enhanced
• DNS Proxy server has been added to the router (Chapter 2).
• PPP Callback has been implemented (CBCP and RFC1570
LCP Callback).
• Support for Auto-Detection of Switch Type and SPID
("Plug'n'Play ISDN") for USA.
• Advice of Charge information is now interpreted by the
Nautica router.
• Support for Mixed Leased and Switched ISDN B channels on
the same BRI.
• The default IP address of a Nautica router is now 10.1.1.1.
• By default the DHCP server is enabled in the SYSTEM
context.
• By default the all-protocols parameter is set to "yes" in the
NAT context.
• The default blacklist timeout is now 20 seconds.
• It is now possible to disable all ISDN autocalls with a single
command.
• System logging using Nautica Log has been implemented
(page 1-4).
• Debug levels and trace messages have been rationalized.
• NauticaRS 5.0 has additional bridge functionality.
• IP RIP has been enhanced to support both Split Horizon and
Poison Reverse.
(page 1-3).
(page 1-4).
119136-D Rev. 00