Table of Contents
Advertisement
Checks before Installation
Deciding On an Installation Site
Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location
can cause accidents, fire, faulty operation, or breakdown.
WARNING
Install the machine in a location that is level, stable, and able to bear the weight of the machine.
The total weight of the machine may reach 400 kg (881.9 lb.) (54-inch model: 300 kg [661.4 lb.], 30-inch model: 200 kg
[440.9 lb.]) or more. Installation in an unsuitable location may cause a major accident, including tip over, fall, or col-
lapse.
WARNING
Never install this machine outside or in any location where exposure to water or high humidity
may occur.
Current leakage may cause electrical shock or fire.
WARNING
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
WARNING
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an
electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.
CAUTION
Conduct operations in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such as becoming caught in the machine as the
result of an inadvertent stumble.
CAUTION
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
4
Introduction
Advertisement
Table of Contents
