Step 10: Initial Settings And Ink Filling - Roland TrueVIS LG-640 Setup Manual

Step 10: Initial Settings and Ink Filling

1. Make the initial settings
Procedure
1.
Turn on the main power switch.
2.
Tap the operation panel.
The operation panel turns on, and the [Tap to display the screen.] screen appears.
3.
Tap the operation panel within 10 seconds of the [Tap to display the screen.] screen appearing.
The sub power turns on and the [Language] screen appears.
4.
Tap [English].
MEMO
Default setting: [English]
The language selection screen appears.
5.
Select the language and tap [OK].
6.
Tap [Save].
7.
The [Units] screen appears. Set the [Length] and [Temperature].
1. Assembly and Ink Filling
Installation
43