Use The Belt Clip; Handset Advice; Re-Initialization; Handset Interference - Nortel C4010 User Manual

Use the belt clip

Handset advice

Re-initialization

If your handset display freezes or the handset does not operate correctly, re-
initialize. The re-initialize key is located above the handsfree key.

Handset interference

The C4010, C4010Ex, and C4020 handsets meet all required EMC
standards. However, the handset can interfere with other electronic
equipment, such as older PCs and wired telephones. To prevent this
interference, try to keep the handset at least one half meter away from other
electronic equipment.

Call disconnect

If you place the handset in the battery charger while you are on a call, the
call disconnects.
Standard 2.00
U s e f ul i nf o rm a t io n
To attach the belt clip, slide the belt clip into
the clip button on the handset and attach to
your belt.
To remove the belt clip, press the top of the
clip and slide it out of the clip button.
Press the re-initialize key lightly with the tip
of a pen or pencil until the handset
screen resets.
49