Mounting A Cd (Unix Only) - Nortel Versalar 15000 Software Manual

Mounting a CD (UNIX Only)

The command for mounting the CD varies depending on the specific
configuration of the workstation, such as the number of CD-ROM drives. If the
suggested
To mount a CD:
1.
2.
3.
4.
5.
Go to
305932-D Rev 00
command fails, consult your operating system documentation.
mount
Insert the CD and drive tray into the CD-ROM drive.
On Solaris, the Volume Manager automatically mounts the CD onto /cdrom;
go to "Copying Router Files to a UNIX Workstation" on page
does not automatically mount, see
page -4.
Log in as root by entering:
su
At the password prompt, enter your root password.
If a subdirectory or file system does not already exist for the CD, create
one by entering one of the following commands:
• For SunOS or HP-UX, enter:
mkdir /cdrom
• For AIX, enter:
crfs -v cdrfs -p ro -d'cd0' -m /cdrom -A'no' -t'no'
Mount the CD by entering one of the following commands:
• For SunOS, enter:
mount -r -t hsfs /dev/ <cd_address> /cdrom
• For HP-UX, enter:
mount -r -t cdfs -o cdcase /dev/dsk/ <cd_address> /cdrom
• For AIX, enter:
mount -o ro -v cdrfs /dev/ <cd_address> /cdrom
"Copying Router Files to a UNIX Workstation" on page
Upgrading the Versalar Switch Router 15000 Software
"Manually Mounting a CD on Solaris" on
-4. If the CD
-4.
3