Prem-I-Air EH1934 Instruction Manual page 4

⚫ Do not leave the unit running unattended. Do not tilt or turn over the unit.
⚫ Do not unplug while the unit is operating, this may cause damage and unwanted wear.
⚫ Do not unplug by pulling on the power cord.
⚫ Do not use in bathrooms.
⚫ Use only on firm flat surfaces and this unit is not intended for use in Caravans, boats or other
unstable locations.
⚫ Do not use an extension cord or an adapter plug.
⚫ Do not put objects on the unit.
⚫ Do not climb or sit on the unit.
⚫ Do not insert fingers or other objects into the air outlet.
⚫ Do not touch the air inlet or the aluminum fins of the unit as they have sharp edges.
⚫ Do not operate the unit if it is dropped, damaged or showing signs of product malfunction.
⚫ Do not clean the appliance with any chemicals.
⚫ Ensure the unit is kept away from fire.
⚫ Do not use where paint, petrol or other flammable liquids are stored.
⚫ The unit shall be installed in accordance with national wiring regulations.
⚫ Do not use means to accelerate the defrosting process or to clean, other than those recommended
by the manufacture.
⚫ The appliance shall be stored in a room without continuously operation sources (for example: open
flames, an operating gas appliance or an operating electric heater).
⚫ The appliance shall be stored so as to prevent mechanical damage from occurring.
⚫ Do not piece or burn, even after use.
⚫ Be aware that refrigerants may not contain an odor.
⚫ Pipework shall be protected from physical damage and shall not be installed in an unventilated
space, if that space is smaller than 4m².
⚫ Compliance with national gas regulations shall be observed.
⚫ Keep any required ventilation openings clear of obstruction.
⚫ Do Not use this appliance for other than its intended use.
⚫ The appliance shall be stored in a well-ventilated area where the room size corresponds to the room
area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant circuit should hold a
current valid certificate from an industry-accredited assessment authority, which authorizes
their competence to handle refrigerants safely in accordance with an industry, recognized assessment
specification.
Servicing shall only be performed as recommended by the equipment manufacturer.
Maintenance and repair requiring the assistance of other skilled personnel shall be carried out
under the supervision of the person competent in the use of flammable refrigerants.
If you don't understand something or need help, please contact the dealer services