Quick-Start Guide for Remote Access Concentrators
RAC Reference Documentation
118352-A Rev. A
16
In addition to this guide, the following documentation supports the Model
5399 and Model 8000 RAC:
Model 5399 Remote Access Concentrator Hardware Installation Guide
(166-024-162) -- Describes how to install the Model 5399 RAC, set the
IP address, and make the RAC operational using factory defaults.
Installing the Model 8000 Remote Access Concentrator
(118353-A Rev. A) -- Describes how to install the Model 8000 RAC, set
the IP address, and make the RAC operational using factory defaults.
Provisioning WAN Lines for Remote Access Concentrators
(118354-A Rev. A) -- Describes the information you need to provision
WAN lines for Remote Access Concentrators. The guide provides several
switch types and switch parameters which must be negotiated through
the telco before installing the RAC.
Installing Remote Access Concentrator Software for UNIX
(118355-A Rev. A) -- Describes how to install Remote Access
Concentrator software on a UNIX server. This book provides examples
of the installation script as well as information about installing a particular
security regime.
Installing Remote Access Concentrator Software for Windows and
Windows NT
(118356-A Rev. A) -- Describes the procedures for installing
Server Tools, the Network Administrator (na) utility, and Quick2Config
Annex on a host server running Windows software.
Managing Remote Access Concentrators Using Command Line
Interfaces
(118357-A Rev. A) -- Describes how to configure and maintain
the RAC using UNIX command-line interfaces for both UNIX and
Windows environments.