Quick-Start Guide for Remote Access Concentrators
Roadmap
118352-A Rev. A
12
The roadmap provides a series of tasks which you must perform in
sequential order to install, configure, and boot a RAC. Refer to the
specified documentation for detailed instructions. The roadmap can be
divided into two distinct areas: installation and configuration and
customization.
Installing and Configuring the RAC
This portion of the roadmap lists the tasks you must perform to install
and configure the RAC and the documentation needed to perform these
tasks.
Task
Prepare to install the Model 5399 or
Model 8000 RAC
- Confirm that all WAN provisioning
requirements are met:
- IP address
- Boot type (net or self)
- Image location (TFTP or local)
- Confirm required platforms:
- PC running Windows or UNIX
- DEC Alpha (Windows NT 4.0)
- Workstation running UNIX
Install RAC software on the server:
-UNIX
- Install RAC Software
- Install Annex Manager (optional)
-Windows
- Install na
- Install server tools
- Install Quick2Config Annex
Documentation
See the provisioning information
provided by your telco.
For Windows, see
Installing Remote
Access Concentrator Software for
Windows and Windows NT.
For UNIX, see
Installing Remote
Access Concentrator Software for
UNIX.