26 Installing the Nortel Ethernet Routing Switch
Installation of SFP transceivers
This section describes how to install SFP transceivers.
To install SFP transceivers, perform the following procedure.
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Action
Remove the transceiver from the protective packaging.
Verify that the transceiver is the correct model for the network
configuration.
Grasp the transceiver between your thumb and forefinger.
Insert the transceiver into the proper module on the switch. Apply a
light pressure to the transceiver until it clicks and locks into position
in the module.
Transceiver insertion
Remove the dust cover from the transceiver optical bores.
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B) 03.01 Standard
5.1 19 November 2007
—End—