Removal Of Sfp Transceivers - Nortel 4524GT Installation Manual

Removal of SFP transceivers

This section describes how to remove SFP transceivers.
To remove SFP transceivers, perform the following procedure.
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Installation and removal of Small Form-factor Pluggable (SFP) transceivers 27
Action
Disconnect the network fiber cable from the transceiver.
Use the locking/extractor mechanism on the transceiver to release
it. The locking/extractor mechanism varies from model to model as
illustrated in "Transceiver locking/extractor mechanism examples"
(page 27).
Transceiver locking/extractor mechanism examples
Slide the transceiver from the module slot.
If the transceiver does not slide easily from the module slot, use a
gentle side-to-side rocking motion while firmly pulling the transceiver
from the slot.
Attach a dust cover over the fiber optic bores and store the
transceiver in a safe place until you need it.
Discard transceivers in accordance with the proper laws and regulations.
Nortel Ethernet Routing Switch 4500 Series
Installation Guide
NN47205-300 (322811-B) 03.01 Standard
5.1 19 November 2007
ATTENTION