Power Specifications; Ac Power Specifications - Nortel 2526T Reference Manual

18 Before You Begin
Power specifications
AC power specifications
The following table describes the AC power specifications for the Ethernet
Routing Switch 2500 Series.
Models:
Input current:
Input voltage (rms)
Power consumption:
Thermal rating:
Connecting AC power
Required cable: AC power cord that meets the requirements of your local
electrical code. Refer to
18)
International power cord specifications
Country and plug description
Continental Europe
• CEE7 standard VII male plug
• Harmonized cord (HAR marking
on the outside of the cord jacket
to comply with the CENELEC
Harmonized Document HD-21)
U.S./Canada/Japan
•
NEMA5-15P male plug
• UL-recognized (UL stamped on cord
jacket)
• CSA-certified (CSA label secured to
the cord)
Regulatory Information for the Nortel Ethernet Routing Switch 2500 Series
Copyright © 2007, Nortel Networks
.
2526T
2550T
Maximum 0.8 A
100-240 VAC at 50-60 Hz
Maximum 96 W
327 Btu/h maximum
for plug specifications.
Specifications
220 or 230 VAC
50 Hz
Single phase
100 or 120 VAC
50-60 Hz
Single phase
Nortel Ethernet Routing Switch 2500 Series
NN47215-100 (323169-B) 02.01 Standard
4.1 19 November 2007
"International power cord specifications" (page
Typical plug
2526T-PWR
2550T-PWR
Maximum 2.9 A
100-240 VAC at 50-60 Hz
Maximum 350 W
500 Btu/h maximum