Nortel 2350 Quick Start Manual page 27

3
4
5
Figure 8: Quickstart configuration example
2360#
quickstart
This will erase any existing config. Continue? [n]: y
Answer the following questions. Enter '?' for help. ^C to
break out
System Name [2360]:
Country Code [US]:
System IP address []:
System IP address netmask []:
Default route []:
Admin username [admin]:
Admin password []:
Do you wish to set the time? [y]:
Enter the date (dd/mm/yy) []:
Enter the time (hh:mm:ss) []:
Enter the timezone []:
Enter the offset from GMT for 'AST' in hh:mm [0:0]:
Do you wish to configure wireless? [y]:
success: created keypair for ssh
success: created keypair for admin
success: created self-signed certificate for admin
success: remember to save this config
2360#
save config
Enter quickstart to access the quickstart wizard.
The quickstart wizard asks a series of questions, as shown in
can enter ? at any time for more help, or press Ctrl+C to quit.
Note: When the script asks: "Do you wish to configure wireless?", enter n
to skip this process. Wireless configuration will be completed using WMS.
Enter save config to save the updated configuration file.
Reboot the WSS.
After the switch powers up again, the quickstart configuration changes take effect
immediately.
CA
192.168.248.201
255.255.255.0
192.168.248.1
adminpwd
05/04/06
11:38:00
AST
Nortel WLAN - Security Switch 2300 Series Quick Start Guide
Figure 8 on page
End
n
27
27. You
4:00