Objectives; Audience; Organization; Conventions - Cisco ASR 901 10G Series Hardware Installation Manual

Objectives

This guide explains how to install, maintain, and troubleshoot your router hardware.
It provides the minimum software configuration information. For the detailed configuration procedures,
see the Cisco IOS configuration guide and command reference publications. For more information, see
the
Warranty, service, and support information is in the Cisco Information Packet that is shipped with your
router.

Audience

This guide is designed for personnel who install, configure, and maintain the router. These persons
should be familiar with electronic circuitry and wiring practices and be experienced electronic or
electromechanical technicians. This guide identifies certain procedures that should be performed only
by trained and qualified personnel.

Organization

Chapter
Chapter 1
Chapter 2
Chapter 3
Appendix A
Appendix B
Appendix C

Conventions

Means reader take note.
Note
Means the following information will help you solve a problem.
Tip
Cisco ASR 901 10G Series Aggregation Services Router Hardware Installation Guide
2
"Obtaining Documentation, Obtaining Support, and Security Guidelines" section on page
Title
Introduction
Preparing to Install the Router
Installing the
Cisco ASR 901 10G Router
Troubleshooting
Cable Specifications
Site Log
Description
Describes the hardware features and specifications of
the routers.
Describes safety recommendations, site requirements,
network connection considerations, required tools and
equipment, and provides the installation checklist.
Includes router installation information, and shows
how to connect the router console port.
Describes how to isolate problems, read LEDs,
interpret error and status messages, and recover
software images.
Provides cable specifications to use if you plan to build
your own cables.
Provides example site log.
4.
OL-28105-02