Table of Contents
Advertisement
Powering on the Router
Figure 32: Plug Power Cord Connector into AC-in Receptacle
1
Step 6
Strap in the power cord retainer, to hold it in place and avoid accidental removal. For more information, see
Power Cord Retainer Mechanism
Step 7
Set the power switch to the on (|) position
Power Cord Retainer Mechanism
This section shows how to correctly operate the power cord retainer, to tighten or loosen it while installing
or removing the power supply unit.
Note
Power cord, plugged into the AC-in receptacle
Some of the illustrations do not include the power supply module, for the sake of clarity. The retainer is
otherwise permanently fixed to the power supply module.
Hardware Installation Guide for Cisco 8600 Series Routers
Power Cord Retainer Mechanism
51
Advertisement
Table of Contents
