Table of Contents
Advertisement
Rexroth Frequency Converter EFC x610
Series
Case 2: Acceptance test of a machine or installation with the installed drive
●
systems.
The product standard for the respective type of machine/installation, if exist-
ing, applies to the acceptance test of the machine or installation. In the last
years, some new product standards were created at present.
These new product standards contain references to the product standard
EN 61800-3 for drives or specify higher-level requirements demanding increased
filter and installation efforts. When the machine manufacturer wants to put the
machine/installation into circulation, the product standard relevant to his ma-
chine/ installation has to be complied with for his end product "machine/instal-
lation". The authorities and test laboratories responsible for EMC normally refer
to this product standard.
This documentation specifies the EMC properties which can be achieved, in a
machine or installation, with a drive system consisting of the standard compo-
nents.
It also specifies the conditions under which the indicated EMC properties can
be achieved.
Electromagnetic Compatibility (EMC)
R912005854_Edition 09 Bosch Rexroth AG
91/653
Advertisement
Table of Contents
