Sony Super HAD CCD SSC-DC314 Service Manual page 12

C
2
D
1
8
7
6
5
E
1
2
1-4
1
2
3
4
4
3
Installation
Suitable lens
The lens must be a CS-mount type of less than 1 kg. The protrusion
behind the mounting surface must be within the following limits:
1 CS-mount lens
2 4 mm or less
Changing the plug on an auto-iris lens cable
The camera is supplied with a plug to fit the LENS connector. To
connect an auto-iris lens, first replace the plug on the lens cable with
the supplied plug.
1
Detach the old plug from the lens cable.
2
Solder the lens cable to the pins of the supplied plug. (For cable pin
assignment, refer to the instruction manual for the lens.)
1 Cover
2 Lens cable
Rib (If the cable is thick, cut this off.)
3
Plug (unit accessory)
4
Pin 4 DRV –
5
Pin 2 CONT +
6
Pin 1 CONT –
7
8 Pin 3 DRV +
Fitting the lens
1
Unscrew the lens mount cap.
2
Screw in the lens, and turn it until it is secured.
3
Insert the lens plug in the LENS connector.
When fitting a manual-iris lens, omit step 3.
4
Adjust the focal length by turning the adjustment ring.
Caution
Keep the lens mount cap on the camera when not attaching a lens.
C
D
E
SSC-DC314/DC318P/DC310P (UC, CE)