Before You Begin - Ricoh Ri 1000 Parts Replacement

Ri 1000 Replace Right Ink Sump

Before you Begin

Do NOT install part(s) until you have completed the following
•
Read this document and all accompanying documentations for this printer before
use.
•
Contact your Ricoh supplier prior to installation if any information is unclear or if
you have any questions.
•
Follow all safety precautions as outline by user manual, and this manual and quick
installation guide as well as the following general guidelines:
•
Avoid contact with any sharp edges that are exposed during part installation
process.
•
Ensure that main power switch in the back is turned off until installation is
complete and disconnect the power cord from the machine.
•
Ensure proper grounding via straps when handling any electrical components.
•
Keep all components, especially any electrical components, dry during
installation.
•
Double check that no components have been inadvertently exposed to ink
(via splash/spill/etc.).
•
Wipe/remove/dry ink prior to powering up machine.
:
73