Ricoh Ri 1000 Parts Replacement page 192

Ri 1000 Replace X Encoder Strip
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing a
X Encoder Strip replacement. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/When To Replace
1. CR encoder error appears and can not be cleared and there are scratches and or
stains that cannot be cleaned
Supplies
Required supplies:
1. Power Supply Unit (J1021854)
2. #1 Phillips Head Screwdriver
192