Ricoh Ri 1000 Parts Replacement page 113

Ri 1000 Replace Ink Supply Unit KC
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing a
Ink Supply Unit replacement. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/ When To Change
1) This part should be changed when prompted by the part replacement warning due
to the life count for the part
2) Repeated Ink Pump time out errors –
3) Cartridges written to 0% erroneously
4) Failure to read the ink cartridge correctly
Supplies
Required supplies:
1. Ink Supply Unit W1W2(J1023059), Ink Supply Unit KC(J1023060), Ink Supply Unit
MY(J1023061)
2. #1 Phillips Head Screwdriver
3. Tissue {included with Unit}
4. (2) Rubber Tube Caps {included with unit}
113