Ricoh Ri 1000 Parts Replacement page 38

Ri 1000 Replace Left Ink Sump
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing a
Left Ink Sump replacement. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/ When To Change
1) This part should be changed when prompted by the part replacement warning due
to the life count for the part
2) If preparing to ship the machine – (can just clean)
3) In any case it is noticed that it is damaged or leaking
Supplies
Required supplies:
1. Left Ink Sump (J0184200)
2. #1 Phillips Head Screwdriver
3. 5.5mm Nut Driver (optional)
38