Ricoh Ri 1000 Parts Replacement page 7

Ri 1000 Clean X Encoder Strip
Introduction
This TD&R document is intended to aid RICOH Ri 1000 users in providing maintenance
and basic repair service. The information provided is intended to help with performing c
leaning of the X Encoder Strip. Accordingly this TD&R document is limited to meet the
objectives indicated above.
The majority of the hardware used in the RICOH Ri 1000 Direct to Garment printer is in
Metric series.
When performing maintenance on the machine, be sure to wear commercially available
goggles, gloves and a mask.
Scope
This applies to RICOH Ri 1000 printers.
Symptoms/ When To Change
1. Printer will prompt for maintenance every 7 days – the strip should be inspected at
this time and cleaned at least once a month.
2. CR encoder error appears due to dirt or debris
Supplies
Required supplies:
1. #1 Phillips Screwdriver
2. Cleaning Fluid
3. Lint Free Wipes
Type
1 (257058)
7