Planet WGS-4215 Series User Manual page 75

• Daylight Saving Time
• Daylight Saving Time
Offset
• Recurring From
• Recurring To
• Non-recurring From
• Non-recurring To
This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
Daylight Saving Time duration to repeat the configuration every year. Select
'Non-Recurring' and configure the Daylight Saving Time duration for single time
configuration. (Default: Disabled).
Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to
1440 )
• Week - Select the starting week number.
• Day - Select the starting day.
• Month - Select the starting month.
• Hours - Select the starting hour.
•
Minutes - Select the starting minute.
• Week - Select the starting week number.
• Day - Select the starting day.
• Month - Select the starting month.
• Hours - Select the starting hour.
•
Minutes - Select the starting minute.
• Week - Select the starting week number.
• Day - Select the starting day.
• Month - Select the starting month.
• Hours - Select the starting hour.
•
Minutes - Select the starting minute.
• Week - Select the starting week number.
• Day - Select the starting day.
• Month - Select the starting month.
• Hours - Select the starting hour.
•
Minutes - Select the starting minute.
75
User's Manual of WGS Managed Series