Planet WGS-4215 Series User Manual page 163

VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follows:

Untagged packet entering VLAN 2
While [PC-1] transmits an untagged packet enters Port-1, the Managed Switch will tag it with a VLAN Tag=2.
1.
[PC-2] and [PC-3] will received the packet through Port-2 and Port-3.
[PC-4], [PC-5] and [PC-6] received no packet.
2.
While the packet leaves Port-2, it will be stripped away its tag becoming an untagged packet.
3.
While the packet leaves Port-3, it will keep as a tagged packet with VLAN Tag=2.
4.

Tagged packet entering VLAN 2
While [PC-3] transmits a tagged packet with VLAN Tag=2 enters Port-3, [PC-1] and [PC-2] will receive the packet
1.
through Port-1 and Port-2.
While the packet leaves Port-1 and Port-2, it will be stripped away its tag becoming an untagged packet.
2.

Untagged packet entering VLAN 3
1. While [PC-4] transmits an untagged packet enters Port-4, the switch will tag it with a VLAN Tag=3. [PC-5] and
[PC-6] will receive the packet through Port-5 and Port-6.
2. While the packet leaves Port-5, it will be stripped away its tag becoming an untagged packet.
3. While the packet leaves Port-6, it will keep as a tagged packet with VLAN Tag=3.
In this example, VLAN Group 1 is set as default VLAN, but only focuses on VLAN 2 and VLAN 3 traffic
flow.
VID Untagged Members
1 Port-7~Port-8
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-5-2 VLAN and Port Configuration
163
User's Manual of WGS Managed Series
Tagged Members
N/A
Port-3
Port-6